OSHA-Aligned JSAs for
Commercial Roofers

Built for roofing crews doing TPO, shingle, and flat-roof commercial jobs that require JSA submission to the GC.

Type one sentence. Get a complete Job Safety Analysis PDF — ready to review and submit.

JSAQuick generates OSHA-referenced first drafts for roofing crews. You review. You approve. You stay in control.

⚠️ Average OSHA fine: $15,625. A missing or incomplete JSA is the #1 trigger.

No credit card required • 3 JSAs free

Real output from JSAQuick — TPO flat-roof membrane installation with hot-air welding on a 4-storey commercial building

JSAQuick — Generated JSA Preview

#	Job Step	Potential Hazard	Control Measure	OSHA Ref.
1	Set up roof edge protection and anchor points	Fall from unprotected roof edge; parapet height less than 39 inches	Warning line system set 6 ft from edge; personal fall arrest system anchored to 5,000 lb-rated point; safety monitor assigned when within 6 ft of edge	29 CFR 1926.502(b)
2	Crane hoist of TPO rolls and insulation to roof deck	Struck-by from dropped materials, overloading of deck from concentrated material storage	Structural load limit confirmed with engineer; materials spread across deck — no stacking; tag lines used on all crane lifts	29 CFR 1926.753
3	Hot-air weld TPO seams with hand-held welder	Thermal burns from 1,000°F gun, fire on combustible insulation, toxic fume inhalation	N95 respirator upwind of welding; Class ABC extinguisher within 30 ft; 5-min fire watch after all welding; gloves and long sleeves required	29 CFR 1926.352
4	Install roof penetrations and flashing details	Slip on wet membrane surface, tool drops to workers below, overreaching near edge	Non-slip footwear required; tool tethers on all hand tools; barricade ground level below penetration work; buddy system near edge	29 CFR 1926.501(b)

1. Describe the task

Enter your job task, industry, and risk level into our simple form.

2. AI generates JSA

Our AI instantly drafts a structured JSA with specific hazards and actionable controls.

3. Download PDF

Review the generated JSA and download a formatted PDF ready for sign-off.

Everything You Need

More than just a generator

Every tool you need to create, edit, and manage your safety documents — all in one place.

AI Refine

Describe any change in plain English. The AI rewrites and updates the JSA instantly — no starting over.

Inline Edit

Click any cell in the JSA table to edit it directly in your browser. No PDF editor, no re-export needed.

Duplicate & Reuse

Clone any past JSA as a starting point. Contractors doing repeat jobs save hours every single week.

JSA Library

Every document is auto-saved and searchable. Access your full history — nothing ever lost.

Multi-Country Standards

OSHA (US), India, UAE, and Australia standards built in. UK RAMS & AU SWMS soon

Branded PDFs

Your company name, site, and supervisor printed on every document. Look professional on every job site.

Common Roofing Hazards & Safety Controls

When commercial roofing contractors bid on TPO, EPDM, or metal roofing projects, General Contractors heavily scrutinize their safety documentation. Roofing remains one of the highest-risk trades, making site-specific Job Safety Analyses critical for OSHA compliance.

Fall Protection (OSHA 29 CFR 1926.501): The leading cause of roofing fatalities. Your JSA must explicitly detail edge protection, warning line systems, safety monitors, or personal fall arrest systems (PFAS).
Hot Work & Torch Applications: Applying modified bitumen requires strict fire watch protocols, Class ABC fire extinguishers on the roof deck, and burn prevention measures.
Material Handling & Hoisting (OSHA 1926.552): Loading insulation boards, rolls of membrane, and ballast onto the roof deck involves struck-by and crushing hazards during crane or hoist operations.
Weather Hazards: Wind gusts can easily lift TPO rolls, and morning dew or frost turns a flat roof into a severe slip hazard.

Roofing JSA FAQs

Do I need a unique JSA for every roofing job?

Yes. OSHA and most commercial GCs require a site-specific JSA. While the hazards of installing TPO might be similar, site conditions like parapet wall height, access points, and power line proximity change on every job.

Will JSAQuick cite Subpart M for fall protection?

Yes. Our generator specifically looks for fall hazards in your task description and automatically cites relevant sections of OSHA 29 CFR 1926 Subpart M on the output.

Is this OSHA compliant?

JSAQuick generates OSHA-aligned drafts with specific CFR regulation references on every control measure. Every document must be reviewed and approved by a qualified safety professional before work commences.

Can I edit the generated JSA?

Yes. Use the Refine feature to describe improvements and JSAQuick will update the JSA instantly. You can also download the PDF and edit it.

One OSHA fine averages $15,625.
JSAQuick Pro costs $79/month.
That's 16 years of protection for the price of one fine.

Monthly

Yearly Save up to 43%

Free

forever

✓ 3 JSAs total
✓ OSHA format
✓ PDF download
✓ No credit card

Get Started Free

Starter

$39

per month

Need more? Pro is only $40 more — unlimited.

✓ 12 JSAs per month
✓ OSHA format
✓ OSHA CFR citations
✓ Standard PDF
✓ 30-day library
✓ Email support

Start for $39

OSHA-Aligned JSAs forCommercial Roofers